Loading

Blog

Can I Install My Own Electric Vehicle Charging Station In My Home?


Can I Install My Own Electric Vehicle Station
In My Home in Macungie, PA?

How to Install An Electric Vehicle Charging Station in Your Home


Electric charging stations come with a great deal of convenience, especially when installed in your Macungie, PA home. However, due to their complexity, many people wonder if it’s possible to install your own electric vehicle station at home.

Yes, it’s possible to install your own electric vehicle charging station in your own home. In order to do so, you’ll need to select the correct charger, find a good position, and work with a licensed electrician to ensure proper installation of the device. As long as your home can handle the voltage, you can turn it into a personal charging station for your vehicles.

The following guide gives you all the information you need about installing your own electric vehicle charging station. Keep in mind that while you can do the installation yourself, it’s highly recommended to hire a professional.


Choosing The Right Electric Vehicle
Charging Station For Your Home

Not all electric vehicles are compatible with every type of charger. When you’re first choosing a charging station for your electric vehicle, the first step is selecting a charger. Below are the types of chargers commonly associated with electric vehicles:

  • Level 1 Chargers: These chargers take 8 to 12 hours to fully recharge a depleted battery, depending on your vehicle. In most cases, your vehicle comes with one of these chargers.
  • Level 2 Chargers: These units typically require 240 volts for charging and are the most common type installed in homes. If you’re installing a charging station in your home, you’ll most likely be selecting a level 2 charger that’s compatible with your vehicle.
  • Level 3 Chargers: Among electric vehicle chargers, the level 3s are the most powerful. They’re capable of significantly charging a vehicle within an hour. These chargers are usually not found in homes as they require a large voltage capacity and are more fit for non-residential areas.

It’s best to work with your local electric vehicle installation service in the Lehigh County Area to get the right charger for your home. Once you’ve chosen the correct one, you can start with the installation process.

How To Install Your EV Charging Station In Macungie, PA

Following these steps, you can install your own electric vehicle charger. Make sure to work with a professional and perform each step carefully, especially when working with electrical equipment and wiring.

Check Your Home’s Electric Vehicle Charging Capacity

Before going through with your EV charging installation, make sure your home can handle the extra charge. You’ll need a licensed electrician to check your property. Keep in mind, most homeowners use a level 2 charger, which requires 240 volts. In some cases, an electrician may suggest an electrical system upgrade.

Get The Appropriate Materials For An EV Charger Installation

You’ll need specific materials to get the job done. The materials needed for an EV charging station include the charging station itself, wires, connections, and a conduit. Other components may be required, depending on the type of charger you selected.

Choose A Convenient Location

After selecting the appropriate charger for your electric vehicle, you should choose your charging location. Any location will work as long as it is properly ventilated, has enough space for your charger and vehicle, and it is easy to access. When choosing the location, keep in mind the weather and outside forces that could potentially damage your charger.

Install The Charging Station

First, you’ll install your charging station. Usually, this requires mounting it on a wall near your electric panel. After you’ve installed the charging station, you’ll run your conduit and wiring from your electric panel to your charging station. Make sure to shut off your power before doing the electrical work to avoid potential damage.

Check Your Wiring

You’ll perform connections for your neutral, ground, circuit breaker, and hot wires. Check your conduit. Make sure all of your connections are done correctly before you turn your power back on.

Test The Installation

Finally, start testing your installation. Make sure the charging process works properly and there are no issues with any electrical components. If you have any software updates or connections to perform, this is the perfect time to do that as well.

Once you’ve ensured your electric vehicle installation is complete, safely continue to charge it at home whenever you like.

Perform Routine Maintenance

To maintain the longevity of your EV charger, perform maintenance regularly. Keep cables secure when they aren’t in use. Also, regularly clean your equipment. If your electric vehicle charger is located outside, keep it protected from extreme weather and outside hazards when possible.

By doing regular cleaning and maintenance, you reduce the chances of needing repairs or a replacement.


Call Our Licensed Professionals For Your EV
Charging Station Installation In Macungie

It’s no easy task installing an electric vehicle station in your home in the Lehigh County Area. The potential for electrical damage, improper installation, and mistakes in wiring are high. If you’re not an experienced electrician, installing your own charging station can be costly and time-consuming.

The best thing you can do for your electric vehicle and your home is to hire a licensed professional. Shafnisky Electric’s team members are trained to perform these electric vehicle installations as efficiently as possible, eliminating the risks that come with doing a project like this yourself.

Trust our team of professionals at Shafnisky Electric to get the job done. Contact us for a free consultation today.


Share this article